A standard washer or dryer is typically about 27 inches wide, 30 to 34 inches deep and 38 to 39 inches tall, while compact units are about 24 inches wide, and a stacked pair stands roughly 74 to 80 inches tall. Front-load machines run a little deeper than top-load ones, and the door and hoses add several inches. Always check the spec sheet for your model, then add space around it: a gap at the sides, room behind for hoses and the vent, and a clear path through doorways and stairs.

PCBy the Pixl Canada install team. Updated . 5 min read.

  • Typical sizes by type in one table
  • Space to allow around the machines
  • Delivery path checklist
  • Pixl installs from $110 for a pair
A metal exterior vent cap with raindrops on a house wall.
Key takeaways

  • Most full-size machines are about 27 in wide. Compact ones are about 24 in.
  • Add space for hoses, the vent and the door swing.
  • Measure doorways, corners and stairs, not just the laundry room.
  • Sizes vary by model, so use the spec sheet.

How wide, deep and tall is a washer and dryer?

These are typical ranges for the Canadian market. Individual models differ by an inch or two, so treat the table as a planning guide and confirm with the spec sheet.

Typical washer and dryer dimensions in inches (planning ranges)
TypeWidthDepthHeight
Front-load washerAbout 27About 30 to 34About 38 to 39
Top-load washerAbout 27About 27 to 30About 42 to 44 (lid closed)
Dryer (full size)About 27About 30 to 34About 38 to 39
Compact washer or dryerAbout 24About 24 to 26About 33 to 36
Stacked front-load pairAbout 27About 30 to 34About 74 to 80 (plus kit)

How much space should you leave around them?

Space to allow around a washer and dryer
DirectionWhat to allowWhy
SidesAbout 1 inch between machines and wallsVibration and airflow
BehindSeveral inches for hoses, cord and the vent elbowThe duct must not be crushed. See dryer vent length rules
In frontEnough to swing the door fully openDoor depth adds to the footprint
AboveClearance for a shelf, or the stacking kitA stacked pair needs the full height

Will the machines get into the room?

  1. Measure doorways at their narrowest, including the trim.
  2. Measure hallway corners and stairs, since the machines are tall and heavy.
  3. Check the laundry room for the full width plus the gaps above.
  4. Plan the vent run from the dryer to the outside.
  5. Book the install when the delivery date is confirmed.

Thinking of stacking? Read how to stack a washer and dryer. Pixl installs a side-by-side pair for $110 and a stacked pair for $150, before tax, with a new dryer duct at $20. See washer and dryer installation and the cost guide.

Washer and dryer size: frequently asked questions

How wide is a washer and dryer?

Full-size machines are typically about 27 inches wide. Compact units are about 24 inches.

How deep is a washer and dryer?

Typically 27 to 34 inches, with front-load machines a little deeper than top-load.

How tall is a washer and dryer?

About 38 to 39 inches for most front-load machines, and 42 to 44 inches for top-load washers.

How tall is a stacked washer and dryer?

Roughly 74 to 80 inches, depending on the models and the stacking kit.

How much space do I need behind a dryer?

Several inches for hoses and the vent elbow. The duct must not be crushed.

Can Pixl install my washer and dryer?

Yes. $110 side by side or $150 stacked, before tax. You pay after the job.

Measured and ready to install?

Side by side $110, stacked $150, before tax. You pay after the job.

Sources and method. Planning ranges summarised from typical manufacturer specifications for full-size, compact and stacked machines sold in Canada. Models differ, so always confirm with the spec sheet. Pixl prices were checked in October 2026, in Canadian dollars, before tax.

About Pixl Canada. Pixl Canada is an installation company based in Edmonton, Alberta, serving cities across Canada with TV mounting, security cameras, appliance installation and smart home setup. Call or text (587) 899-7495. Open Monday to Saturday 8am to 8pm and Sunday 9am to 7pm.

Need a price for this? Get your free quote